Taylormade drivers

Taylormade drivers come with many innovative features. Movable Weight Technology is one of them. This technology allows a golfer to quickly adjust the weight placement as per the requirements. This taylormade driver has 3 sets of weights; 1 gram, 1 gram and 16 grams. Unfortunately, many golfers do not know how to set the weights for a Taylormade R7 460 Driver in different situations. Hence, I have provided the information below.

To correct a hook in the trajectory of your drive:
First, put the 16 gram weight in the toe weight hole using the Taylormade Torx wrench. Then put the two 1 gram weights in the center and heel weight holes. With this adjustment, you will be able to correct a hook in the trajectory of your drive.

To correct a slice in the trajectory of your drive:
Here, put the 16 gram weight in the heel weight hole using Taylormade Torx wrench. Now, put the two 1 gram weights in the center and toe weight holes. This adjustment will allow you to correct a slice in the trajectory of your drive.

To adjust the weight placement on the driver:
Put the 16 gram weight in the center weight hole using Taylormade Torx wrench. After that, put the two 1 gram weights in the toe and heel weight holes. This weight adjustment is useful when you do not have a slice or a hook in the trajectory of your drive.

Also, checkout here more about Taylormade r11 adjustment

This driver is not very much different from the TaylorMade r7 Limited driver. However, its tip size is .335 compared to that of r7 Limited driver which is .350. This r7 Limited TP driver has a square face angle while r7 Limited driver has a closed face angle. The weight of r7 Limited TP driver shaft is 65 grams whereas r7 Limited driver has a shaft of 60 grams.

TaylorMade r7 Limited TP Driver

The TaylorMade r7 Limited driver is the best movable-weight driver produced ever. Its Movable Weight Technology TM (MWT) with three ports alters in path up to 35 yards from right-to-left or left-to-right for the accuracy and greater distance. Its fast and powerful head shape permits a deeper and lower CG location to promote better launch conditions for greater distance.

The TaylorMade r7 Limited driver applies just 3 weights, one 16-grams and two 1-gram weights. The configuration of the weights is easy because of the driver’s neutral face angle. The configurations are:

• Apply the 16-grams weight in the toe for a shot to bend to the right.
• Apply the 16-grams weight in the heel for a shot to bend to the left.
• Apply the 16-grams weight in the middle port for no draw or fade bias to the path.

The Inverted Cone Technology enlarges the portion of the clubface that delivers fast ball speed to enhance greater distance on off-center hits. This driver comes with a 60-grams Matrix XCon 5.5 MOI graphite shaft which offers less twisting of clubhead on off-center hits. The men’s and women’s lofts are 8.5, 9.5, 10.5 and 11.5 degrees. In addition, for the left-handed men lofts are 9.5 and 10.5.

TaylorMade r7 Limited Driver